Note! Work in progress!

Carburetor, fuel pump, air filter and choke (07, 09, 30)

Intake pipe, exhaust manifold and PAATI 32 carburetor of the Mercedes M 180 II (180.921)

Intake pipe, exhaust manifold, PAATI 32 carburetor and air filter brackets of the Mercedes M 180 II (180.921)

This article is currently empty. Assembling these items shouldn't pose a problem. I did however have some issues around the carburetor. I thought... This part will be added at a later stage, probably in connection with a blog article. Stay tuned!

Choke (30)

The final three pictures show the throttle linkage in the engine compartment and how I protected the choke cable against wear by means of a piece of rubber on the accelerator lever and the bracket for the air filter. Note, in the last picture the cable goes on the wrong side of the accelerator lever! The choke cable goes on the right side, behind, the lever, which is also obvious from the placement of the rubber. Sorry for that mistake while taking the picture....

  • Protective rubber on the air filter bracket
  • Protective rubber on the air filter bracket
  • Protective rubber on the accelerator lever. Note, the picture is WRONG, the cable should go behind and to the right of the lever!

The choke actually belongs to group 30, Pedals and controls...